BMW Z4 - Page 211

Temperature
Concept
The automatic climate control achieves the set
temperature as quickly as possible, if needed, by
using the maximum cooling or heating capacity,
and then keeps it constant.
Adjusting
Press the upper or lower button side to
set the desired temperature.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver" or "Front passenger"
6. "Temperature:"
7. Set the desired temperature.
8. "OK"
Do not rapidly switch between different tempera‐
ture settings. Otherwise, the automatic climate
control will not have sufficient time to adjust the
set temperature.
Temperature of the ventilation
General information
The temperature of the ventilation in the upper
body region can be adjusted.
The temperature is individually adjusted, e.g.
colder toward blue, warmer toward red.
The air flow of the ventilation in the upper body
region heats or cools noticeably, depending on
the adjusted temperature.
This does not change the set interior tempera‐
ture for the driver and front passenger.
Adjusting
Via iDrive:
1. "CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "Driver"
6. "Temp. adjustment upper body"
7. Set the desired temperature:
▷ Toward blue: colder.
▷ Toward red: warmer.
Air conditioning
Concept
The air in the car's interior will be cooled and de‐
humidified and, depending on the temperature
setting, warmed again.
The car's interior can only be cooled with the
drive-ready state switched on.
Switching on/off
Press the button.
Via iDrive:
1.
"CAR"
2. "Settings"
3. "Climate control"
4. "Heating/ventilation"
5. "A/C"
Air conditioning is switched on with the engine
running.
Depending on the weather, the windshield and
side windows may fog up briefly when drive-
ready state is switched on.
The cooling function is switched on automati‐
cally with the AUTO program.
Seite 211
Climate control
CONTROLS
211
Online Edition for Part no. 01402779113 - II/19