PRBS type parametric waveform don’t have Auto Calc, leaving you free to customize Length and Sampling
Rate as you see fit.
You can change the PRBS type by tapping on the PRBS type drop down menu and selecting one amongst
the available ones, as shown in the image below.
Available PRBS types are:
1. PRBS 7
2. PRBS 9
3. PRBS 11
4. PRBS 15
5. PRBS 23
6. PRBS 31
Multitone type parametric waveforms let you create your own custom sum of different sinusoidal tones,
with a maximum of 10 Tones, or less if the number of samples exceed the memory limit.
To Next Page
Loading...