Bobcat 741 - Page 104

REDUCTION GEARCASE (Cont'd)
Disassembly and Assembly (Cont'd)
Remove the bolt at the disc hub [A).
Installation: Put LOCTITE #242 on the bolt and tighten
to
210--235 ft.-Ibs. (285-305 Nm) torque.
Remove the
bolt and washer [8).
Remove the disc hub and key [C).
Put the gearcase housing in the press and remove the D
output shaft [0).
-4-15-
I
I
6-08682
741, 742, 743, 743DS Bobcat Loader
Service Manual