OPERATOR CAB
The
Bobcat loader has
an
operator cab (ROPS and
FOPS)
as
standard equipment to protect the operator
from rollover and falling objects.
A
WARNING
Never modi!)' operator cab by welding,
grinding, drilling holes or adding attachments
unless instructed to do so by Melroe Company.
Changes to the cab can cause
loss of operator
protection from
rollover and falling objects,
and
result
in
injury or death.
W-2069-1285
Check with your dealer if the operator cab has been
damaged.
The operator cab fastening bolts and nuts must be tight
[A].
Tighten to 40-50 ft.-Ibs. (54-68
Nm)
torque.
A
-1-5-
11
Fender
Bolt
MC-01181
C-02599
741,742,743,
7430S Bobcat Loader
Service Manual
To Next Page