HYDRAULIC PUMP (SIN 14999 & Below) (Cont'd)
Removal And Installation (Cont'd)
Remove
the
pump bracket bolt [A].
Installation: Tighten the bolts to
65-70
ft.-Ibs. (89-94
Nm)
torque.
A
Remove the steering linkage and adjustment bolt [B]. B
Raise the pump a small amount and move the pump C
mount forward [C].
Position the pump mount forward as shown
[0].
-2-21-
741, 742, 743, 743DS Bobcat Loader
Service
Manual
To Next Page