TOW VALVES
The tool listed will be needed before attempting to tow the
loader.
MEL 1179-2
- Towing Tool
The loader can be moved (towed) for a short distance (at
a slow speed)
if
it is unable to
do
so under its own power.
IMPORTANT
When repairing
hydrostatic
and
hydraulic
systems, clean the
work
area before
disassembly and keep
all parts clean. Always
use caps and
plugs
on
hoses, tubelines and
ports
to
keep
dirt
out. Dirt can
quickly
damage
the system.
1-2003-0888
Remove the high pressure relief plug.
Remove the spring and the high pressure relief
valve
[A].
Remove the other plug.
Remove the other spring and the high pressure relief
valve [B].
A
B
Install the owing tools (Items 1 & 2)
[C]
and then the plugs C
only.
NOTE: Remove the
tow
tools
before
trying
to
operate the loader.
-3-16-
741, 742, 743,
74305
Bobcat Loader
Service Manual
To Next Page