Bobcat 743 - Lubrication of the Bobcat Loader

LUBRICATION OF THE BOBCAT
LOADER
Lubricate the Bobcat loader as
specified in the Service Schedule on
page 1 9
for best performance of the
Bobcat loader.
See figure 73 for the location of grease
fittings.
Fig. 73 Lubrication Points
TRANSMISSION
OIL FILTER
Always use a good quality lithium based mUlti-purpose grease when you lubricate
the Bobcat loader. Apply lubricant until the extra grease shows.
Grease the universal joints and spline
(Fig. 74, Item 1) every 400 to 500
hours.
Lubricate the seat rails for easy
movement when you adjust the seat
(Fig. 75, Item 1).
Fig. 74 U-Joint Fittings
-34-
CHAIN CASE
6561387
8-3925
Fig. 75 Lubricating Seat
743 Loader
Operator's Manual