Bobcat s250 - Lubricating the Bobcat Loader; Lubrication Locations and Procedure

S250 Bobcat Loader
PM-32 Operation & Maintenance Manual
LUBRICATING THE BOBCAT LOADER
Lubrication Locations
Lubricate the loader as specified for the best
performance of the loader (See SERVICE SCHEDULE
on Page PM-5).
Record the operating hours each time you lubricate the
Bobcat loader.
Always use a good quality lithium based multi-purpose
grease when you lubricate the loader. Apply the lubricant
until extra grease shows.
Lubricate the following:
Figure PM-62
1. Rod End Lift Cylinder (Both Sides) [Figure PM-62].
Figure PM-63
2. Base End Lift Cylinder (Both Sides) [Figure PM-63].
Figure PM-64
3. Lift Arm Pivot Pin (Both Sides) [Figure PM-64].
Figure PM-65
4. Lift Arm Link Pivot (Both Sides) [Figure PM-65].
Figure PM-66
5. Base End Tilt Cylinder (Both Sides) [Figure PM-66].
P-31299
1
P-31300
2
P-31301
3
P-31302
4
P-31305
5