52 S450 Operation & Maintenance Manual
INSTRUMENT PANEL IDENTIFICATION (CONT’D)
Right Panel (Deluxe Instrumentation Panel) (Cont’d)
Figure 17
The first screen you will see on your new loader is shown
in [Figure 17].
When this screen is on the display you can enter the
password and start the engine or change the default
language.
NOTE: Your new loader (with Deluxe Instrumentation
Panel) will have an Owner Password. Your
dealer will provide you with this password.
Change the password to one that you will
easily remember to prevent unauthorised use
of your loader. (See Changing The Owner
Password on Page 212.) Keep your password
in a safe location for future needs.
Change Language:
Press the left or right scroll button to cycle through the
languages. The language that is stopped on becomes
the default language used for the Deluxe Instrumentation
Panel [Figure 17].
The language can be changed at any time. (See
CONTROL PANEL SETUP on Page 208.)
Enter The Password:
Use the numbers on the keypad to enter the password,
then press the [ENTER] button. A symbol will appear on
the display screen for each number entered. The left
scroll button can be used to backspace if an incorrect
number is entered.
If the correct password is not entered, [INVALID
PASSWORD TRY AGAIN] will appear on the display
screen and the password will have to be reentered.
See CONTROL PANEL SETUP for further description of
screens to set up the system for your use. (See
CONTROL PANEL SETUP on Page 208.)
To Next Page
Loading...