Bobcat S450 - Stopping the Loader; Using The Control Levers Or Joysticks

71 S450 Operation & Maintenance Manual
DRIVING AND STEERING THE LOADER (CONT’D)
Operation (SJC) In ‘ISO’ Control Pattern
Figure 56
Select the ‘ISO’ control pattern by pressing the top of the
switch (Item 1) [Figure 56].
WARNING
AVOID INJURY OR DEATH
When operating the machine:
• Keep the seat belt fastened snugly.
• The seat bar must be lowered.
• Keep your feet on the foot rests and hands on
control levers.
W-2399-0501
Figure 57
The joystick that controls drive and steering is on the left
side in front of the seat (Item 1) [Figure 57].
Move the joystick smoothly. Avoid sudden starting and
stopping.
Figure 58
Left Joystick
Functions (Drive And Steering) [Figure 58]:
1. Forward Travel – Move joystick forward.
2. Backward Travel – Move joystick backward.
3. Forward Left Turn – Move joystick forward and to the
left.
4. Forward Right Turn – Move joystick forward and to
the right.
5. Backward Left Turn – Move joystick backward and to
the right.
6. Backward Right Turn – Move joystick backward and
to the left.
7. Left Fast Turn – Move joystick to the left.
8. Right Fast Turn – Move joystick to the right.
P-85307I
NA3049
1
P-90675
1
LEFT FAST TURN
BACKWARD LEFT TURN BACKWARD RIGHT TURN
FORWARD RIGHT TURN
FORWARD LEFT TURN
NA3110
1
2
3
4
5
6
7
SJC in ‘ISO’
Control Pattern
Left Joystick
FORWARD
BACKWARD
RIGHT FAST TURN
8
N
N
N
N
N
N
N
N