Bobcat S650 - Page 13

11 S650 Operation & Maintenance Manual
SERIAL NUMBER LOCATIONS
Always use the serial number of the loader when
requesting service information or when ordering parts.
Early or later models (identification made by serial
number) may use different parts, or it may be necessary
to use a different procedure in doing a specific service
operation.
Loader Serial Number
Figure 1
The loader serial number plate (Item 1) [Figure 1] is
located on the outside of the loader frame.
Figure 2
Explanation of loader Serial Number [Figure 2]:
1. The four digit Model / Engine Combination Module
number identifies the model number and engine
combination.
2. The five digit Production Sequence Number identifies
the order which the loader is produced.
Engine Serial Number
Figure 3
The engine serial number is located on the side of the
engine (Item 1) [Figure 3] behind the alternator.
DELIVERY REPORT
Figure 4
The delivery report [Figure 4] must be completed by the
dealer and signed by the owner or operator when the
Bobcat loader is delivered. An explanation of the form
must be given to the owner.
P100008A
1
P-90175
Module 2 - Production
Sequence (Series)
Module 1 - Model / Engine
Combination
P-90466
1
B-16315