205 S650 Operation & Maintenance Manual
(S650) LOADER SPECIFICATIONS (CONT’D)
Electrical System
Capacities
Alternator Belt driven, 90 amperes, open frame
Battery 12 volts, 950 cold cranking amperes @ -18°C (0°F),
180 Minute reserve capacity @ 25 amperes
Starter 12 volts, gear type, 3,0 kW (4.02 hp)
Instrumentation Gauges:
Engine Coolant Temperature, Fuel Level.
Warning lights:
Fuel Level, Seat Belt, Engine Coolant Temperature, Engine Malfunction,
Hydraulic System Malfunction, General Warning.
Indicators:
BICS™ Functions, Two-Speed, 3-Point Shoulder Belt, Turn Signals, Engine
Preheat.
Data Display:
Operating Hours, Engine rpm, Speed Management Setting, Maintenance Clock
Countdown, Battery Voltage, Service Codes, Engine Preheat Countdown,
Steering Drift Compensation Setting, Drive Response Setting.
Other:
Audible Alarm, Lights, Option / Accessory Switches.
Optional Deluxe Instrumentation Panel:
*Additional displays for: Engine rpm, Coolant Temperature and Oil Pressure;
System Voltage, Hydrostatic Charge Pressure and Hydraulic Oil Temperature.
*Additional Features Included: Keyless Start, Digital Clock, Job Clock, Password
Lockout, Multi-language Display, Help Screens, Diagnostic Capability and
Engine / Hydraulic Systems Shutdown Function.
Fuel 103,1 L (27.2 U.S. gal)
Engine Oil with Filter Change 11,4 L (12.0 qt)
Engine Cooling System
with Heater
without Heater
11,7 L (3.1 U.S. gal)
11,4 L (3.0 U.S. gal)
Hydraulic / Hydrostatic Reservoir 10,2 L (2.7 U.S. gal)
Hydraulic / Hydrostatic System 45,0 L (11.9 U.S. gal)
Chaincase Reservoir 39,2 L (10.35 U.S. gal)
To Next Page
Loading...