Attentions:
A. During video recording , if the battery power is insufficient, the system will save current
record and warn "low battery power" until the machine turned off.
B. During video recording process, if the memory is full (cycle video recording is
disabled), the system will save current record and return to video mode interface.
C.After loop recording is on, the system will save recording video in segments. When
storage is full, the camera will keep recording by covering old data.
D. To turn off motion detection, please long press the "Power" button to power off the
camera. The motion detection option takes effect only once. Motion detection is designed
for long time monitoring; Pleaseturn off this motion detection function when in normal
daily use.
3.3 Take Photos
In photo mode, press the "0K" button, the unit will vibrate with sound and take one
photo and save a JPGfile.
In current mode, long press the "Down" button for 1 second to start/stop taking photos.
https://www.boblov.com/ I Support@boblov.com
To Next Page
Loading...
