65
Dark-colored carpet and certain floor patterns may seem
like edges to Bob’s edge sensors.
If Bob displays TROUBLE NR. 04 while working on your carpet, then you may
need to temporarily deactivate his sensors.
To deactivate Bob’s edge sensors:
Deactivate Edge Sensors
Caution: When the edge sensors
have been deactivated, Bob will be
unable to detect stairs or edges.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
Flip Bob’s power switch ON. Hold down
the UV button on Bob’s cover. The 5 bars
on top of Bob’s screen will begin to flash.
After the 5 bars flash 7 times and remain
still, release the UV button. The 5 bars
will remain lit. This means Bob’s edge
sensors are deactivated.
1 2
To Next Page
Loading...
