72
Trouble Number 02: Main Brush
What to do:
Remove the main brush using a flat head screwdriver, and clean it thor-
oughly from end to end (see page 66). You may use a pair of scissors to cut
hair or thread wrapped around the brush, or a pair of tweezers to remove
congestion from the notches where the main brush is held. If Bob displays
Trouble Number 02 while cleaning on a shag carpet or rug, you may re-
move his main brush and allow him to vacuum without it.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WA LL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
To Next Page
Loading...
