80
Trouble Number 10: Power System
What to do:
If Bob stops working and displays Error Code 10, or displays the Error Code
while on his charging station, his battery may be below the threshold needed
to properly function.
+ Remove him from the station and check his battery connection. Open
the battery compartment and unplug the battery. Wait 30 seconds, then
reinstall the battery.
+ Plug the charging adapter directly into the inlet above his power switch.
Let him charge with his adapter overnight.
+ If Bob is still displaying Error Code 10, he may need a replacement part.
Contact support@bobsweep.com for further assistance.
UV
DIRT
TROUBLE NR.
CAPACITY
AUTO SPOT WALL FOLLOW DOCK
MIN. CLEANING
CHARGING
READY
To Next Page
Loading...
