bObsweep Standard - Page 18

Take Bob back to his charging station or turn him ‘O’ after he is done cleaning in
programs (modes) 2 or 3. In program 1 (auto mode), Bob looks for the station when
his battery falls below 15%.
Choose Bob’s movement patterns:
To use Bob’s cover buttons and choose his movement patterns:
- Press MODE ( ) twice. SPOT sign will appear on the screen.
- Press the PROGRAM button once, twice, or three times to choose Bob’s
movement pattern:
- 1 indicates spiral pattern (1-4 mins).
- 2 indicates zigzag pattern (1-4 mins).
- 3 indicates linear pattern along the walls and corners (about 10mins).
- Press START ( ).
Send Bob to charge:
- Press DOCKING on bObsweep PetHair, or press MODE ( ) 3 times. The
red battery sign with “three full bars” will appear on Bob’s screen.
- Press START( ). bObsweep will start looking for his charging station.
Switch the UV light On/Off:
- The UV light is turned ‘On’ by default every time you switch bObsweep on.
- Press UV ( ) to turn the UV light O or back On.
- Do not look directly into the UV light while ‘On’.