bObsweep Standard - Setting Time and Day

Setting the Time & Day
8AM is the default time. When turning the charging station ‘On’ for the rst time or
after it has been unplugged, it shows the default time.
To set the current time & day on bObsweep’s charging station, follow these steps:
- To set current time’s hour digits, press Time/Clock once. The digits for the
hour will blink. Use Adjust (+) to set the current hour. Press OK to save.
- To set current time’s minute digits, press Time/Clock twice until the digits
for minutes blink. Use Adjust (+) to set the current minutes. Press OK to save.
- To set the current weekday, press the Time/Clock three times until the sign
for weekdays blink on the screen. Press the Adjust Button (+) to set the current
day. Press OK to save.
Note: Press the OK button to save each setting within 30
seconds; otherwise the operation will quit without saving.