Battery
To replace the battery:
- Open the battery cover using a screwdriver, take the battery out, and unplug
the connection.
- To install, plug back the battery (make sure you put it in the correct way) and
place it back in. Tighten the cover using the screwdriver and turn bObsweep
around.
Storing bObsweep
bObsweep should not be left unused with his power switched ON for more than one
week. If you are not using bObsweep for an extended period of time, switch him
OFF. Then, unplug the charging station, remove Bob’s battery, and store everything
in a dry place at room temperature.
Do not leave Bob in direct sunlight.
To Next Page
Loading...
