BOCK FK40 Series - Default Chapter; Table of Contents

3
09716-01.2021-DGbFEPtITrRu
D
GB
F
E
PT
I
TR
Ru
Contents Page
1 Safety 4
  1.1 Identicationofsafetyinstructions
  1.2 Qualicationsrequiredofpersonnel
1.3 Safety instructions
1.4 Intended use
2 Product description 6
2.1 Brief description
2.2 Name plate
2.3 Type key
3 Areas of application 8
3.1 Refrigerants
3.2 Oil charge
3.3 Limits of application
4 Compressor assembly 9
4.1 Setting up
4.2 Maximum permissible inclination
4.3 V-belt drive
4.4 Main bearing load
4.5 Electromagnetic coupling assembly
4.6 Pipe connections
4.7 Pipes
4.8 Operating the shut-off valves
4.9 Operating mode of the lockable service connections
  4.10Suctionpipelter
4.11 Characteristics for K1 special housing
5 Commissioning 14
5.1 Preparations for start-up
5.2 Pressure strength test
5.3 Leak test
5.4 Evacuation
5.5 Refrigerant charge
5.6 Oil level check
5.7 Shaft seal
  5.8 Avoidingliquidshocks
6 Maintenance 17
6.1 Preparation
6.2 Work to be carried out
6.3 Shaft seal, emptying the oil reservoir
6.4 Recommended spare parts/accessories
6.5 Integrated decompression valve
6.6 Extract from the lubricants table
6.7 Decommissioning
7 Accessories 19
7.1 Capacity regulator
7.2 Thermal protection thermostat
8 Technical data 21
9 Dimensions and connections 22
10 Declaration of incorporation 24
11 Service 25