User manual for BCL-B series laser machine
Jinan Bodor CNC Machine Co.,Ltd www.bodorcnc.com
1.Check equipment's grounding situation, and
check grounding line is standard or
not(resistance to ground should not be bigger
than 5Ώ)
2.Check if the original patten has mistake, such
as patten is cross, leaking, or lack something
3.If other patterns don't have this problem, only
some one has such problem
Maybe it's computer's serial
port, engraver's main board's
problem
Postscript
The specification of the final interpretation belongs to Bodor. we will do our utmost
to ensure the accuracy of the contents of this manual. Because the editor is limited, there
may be something wrong or omissions. We all consequences caused thereby does not
assume any form of liability. We bodor does not undertake direct, indirect, special,
incidental or consequential loss or liability due to the use of the manual or the product
improperly caused. Urge readers and colleagues criticized the correction.
Copyright owned by Bodor, without permission, no one can copy, manufacture,
process and use this product and other related parts directly or indirectly. Without
permission, no one can imitate, copy, extract or translate this user manual. People who
violates this requirement will be investigated legal liability.
Jinan Bodor CNC Machine Co., Ltd
2014-09-27
To Previous Page
Loading...
