8
How it works
The Body Clock Stimplus Pro can both SEARCH for acupoints and
STIMULATE them.
Search Mode: A very low current is utilised to measure the body’s
resistance and this information is converted by the device into
pitch variations – the lower the resistance, the higher the pitch.
Since stimulation points are characterised by low resistance,
they can be accurately detected in this way.
Stimulation Mode: Detected points are stimulated by means
of a pulsed electronic signal for selected lengths of time with
adjustable intensity.
During stimulation time the detection beeper sound is replaced
by a green flashing light, which indicates stimulation is taking
place. Three LED flashing light frequencies correspond to the
three stimulation frequencies (rhythms) selected by the user.
Once stimulation is over the device returns automatically to
search mode.
The stimulation signal from the Body Clock Stimplus Pro has a
unique waveform which has been found to be highly effective.
Intensity is controlled by the user and is able to reach a level
sufficient to effectively stimulate the body under most conditions.
WARNING: This device is not a replacement for medical
attention. Consult your doctor in any case of any undiagnosed
pain or illness before using the Body Clock Stimplus Pro.
To Next Page
Loading...
