Usage Guidelines
Page 14
7. Dismounting
a. Before stepping off the unit, lock the Safety Lock back to locked position over the Height Adjustment Tube.
Again, please have an assistant help you, if necessary.
b. Pull the Ankle Brace Lock Pin up to release the foam rollers from around your ankles. Using the Safety Rail handlebars
or the frame to ensure your balance and stability, place one foot onto the ground. Then, once you have balance on
your first foot, step your second foot down onto the ground. Retrieve the Safety Bar (which was removed from Step 2.)
and insert it through the set of holes at the front of the unit, returning it into the locked position.
After your workout and before you dismount the unit,
lock the Safety Lock.
Release your ankles from the Adjustable
Ankle Brace (foam rollers) by pulling
on the Ankle Brace Lock Pin.
With stability and control, lower one
foot onto the ground. When you
are balanced on the first foot, then
you may proceed to lower your
second foot.
Lastly, retrieve the Safety Bar (removed during Step 2) and insert it through the front set of holes to the “locked” position.
FOR THE SAFETY OF YOU AND THOSE
AROUND YOU:
Always lock the
Safety Bar here through front set
of holes (over the Height Adjustment Tube)
to prevent serious injury & unsupervised usage
of the unit.
IT8020
To Next Page
Loading...