39
15
STEP
Turn and loosen Rubber Stop (113)
to take up space and tighten cable.
WARNING
!
!
Selector Rod Top Bolt (98) must be
threaded a minimum of 1/2” into the
Selector Rod (33), and Jam Nut (102)
tightened securely against spring lock
washer (101) to ensure proper connection.
Turn and loosen Rubber Stop (113)
to take up space and tighten cable.
Loosen
Loosen
NOTE 1
Check Jam Nut (102) weekly to be sure it is
tight and locked onto the Selector Rod (33).
To Next Page
Loading...
