Need help?Do you have a question about the Body Solid G4I and is the answer not in the manual?
Assembles the main base frame components including foot caps, front and rear base frames, flat plate, and guide rods.
Routes the weight stack cable through double and single pulley holders.
Adjusts cable tension using selector rod bolt, pulley positions, and rubber stops.
Provides a list of mainframe parts with their corresponding key numbers, quantity, part numbers, and descriptions.
Details all hardware used in the assembly, including key numbers, quantities, part numbers, and descriptions.
Lists the different pads used in the assembly, including their part numbers and descriptions.
Provides a list of all cables used in the assembly, including their part numbers and lengths.
Details accessories such as handles, grips, and straps used in the assembly process.
Illustrates the complete assembly of the G41 unit with all parts and their numerical references.
General| Leg Press | Yes |
|---|---|
| Weight Stack | 210 lbs |
| Type | Home Gym |
| Press Arm | Yes |
| Material | Steel |
To Next Page