7
STEP 2 ASSEMBLE PEDALS
1. Carefully align the threads of the axle on the Right Pedal (70R)
("R" on end of axle) with the threaded hole on the right crank
arm and screw in clockwise by hand. Tighten the pedal to the
crank arm using a 15mm wrench.
2. Repeat the procedure for the left side, but screw the Left Pedal
(70L) in counter-clockwise.
PEDAL
IMPORTANT: First assemble pedals by HAND, not using a wrench. It is
important to match threads exactly. Using a wrench to start the
procedure can easily damage the crank threads. This problem is not
covered under warranty!
To Next Page
Loading...
