BodyMed ZZACOMBO - User Manual

Questions and Answers

A
Amy LittleAug 12, 2025
What to do if I feel rash or tickle on skin during BodyMed ZZACOMBO treatment?
- H
  hkellyAug 12, 2025
  If you experience a rash or tickling sensation during treatment with the BodyMed Medical Equipment, consider the following: First, the treatment time might be too long, so reduce the duration and do the treatment once a day. Second, ensure the electrode is properly adhered to the skin. Third, the electrode interface may be dirty or dry; clean it with a wet cotton cloth before use. Finally, you might have sensitive skin; check your allergy history, change the electrode placement, or shorten the treatment time.
L
Lydia BaileyAug 19, 2025
What to do if BodyMed ZZACOMBO Medical Equipment halts automatically during treatment?
- A
  Amy AllenSep 12, 2025
  If your BodyMed Medical Equipment automatically stops during treatment, it could be due to the following reasons: First, the electrode may have lost connection with your skin; ensure it is properly placed. Second, the battery might be depleted; try replacing it with a new one.
E
evanliAug 27, 2025
Why is there no sensation of stimulation from BodyMed ZZACOMBO Medical Equipment?
- R
  Robert JenningsAug 27, 2025
  If you are not feeling any stimulation from your BodyMed Medical Equipment, there might be a few reasons. First, check that the electrode is making good contact with your skin. If not, reposition it. Second, ensure the electrode is properly connected to the stimulator. Third, the battery may be dead, so try replacing it. Lastly, if your skin is too dry, wipe both the electrode and your skin with a damp cotton cloth.
A
annamillerSep 3, 2025
How to fix no display after replacing BodyMed Medical Equipment battery?
- E
  Eric MathewsSep 3, 2025
  If the BodyMed Medical Equipment display is not working after replacing the battery, consider these possibilities: First, the battery compartment may have a foreign object; inspect and clean it. Second, the new battery might be dead or incorrectly installed; try a new battery or reinstall it correctly. Third, the battery interface might be obstructed; inspect and clean it. Finally, the battery could be the wrong model, or there may be an issue with the interface; replace the battery with the correct model.