windows will be close. These windows will recover after pressing once again.
9. The exercise information above could be dragged down.
8. Program Set
8.1. Enter and Exit Engineer Mode
Enter: After switch on the upright bike, press logo for about 5 seconds to enter engineer
mode.
Exit: Under engineer mode, press Back on upper right corner to exit.
※ If you can not enter engineer mode as described above, it means the software of
treadmill needs to be update, please contact dealer.
8.2. Setting Metric or Imperial system Units
Version name： the name of the version of the APP main program of the system
Version code： the date of the version of the APP main program of the system
Andriod ID： ic identity code of Andriod chip
To Next Page
Loading...