2.2 Prepare the scale for weighing
Illustration 4:
> Unpack the scale from packaging and remove
the plastic bag
> Remove the bottom of the scale (see illustration 4)
> Open the battery cover in the inner part of the Illustration 5:
scale and insert the batteries (4 x 1,5 V AAA).
Consider polarity (see illustration 5)
Illustration 6:
> Open the scale while pulling the handles apart
and swing it open until it’s even on the surface
(see illustration 6)
> The scale is in the correct weighing position Illustration 7:
(see illustration 7)
2.3 Battery use
Battery requirement: 4 x 1,5V AAA alkaline
NOTICE: To avoid damage due to battery leakage:
- Be sure to position + and – symbols as indicated on battery compartment.
- Never mix old and new batteries.
- Always remove exhausted batteries from product.
- Never use a screwdriver or any metal tool to pry batteries from compartment,
doing so may short circuit supply terminals.
- Only batteries of the same or equal type as recommended are to be used.
- The supply terminal is not to be short circuited.
- Remove batteries before putting scale into storage for a prolonged period of
time. After removal of batteries repairing has to be performed.
To Next Page
Loading...