EasyManua.ls Logo

BodyTrain BPM - Lifting and Storing the Treadmill

BodyTrain BPM
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
LIFTING UP THE TREADMILL
Remove the Knob from the lower end of the base frame.
Lift the rear end of the main frame up in the vertical position and then turn the Spring Knob in a
counterclockwise direction until it can be pulled out. Pull out the Spring Knob and then align spring knob
hole. Lock the main frame in place by releasing the Spring Knob until the Spring Knob "pops" down into the
hole on the main frame. For added safety, tighten the Spring Knob in a clockwise direction.
Place the Knob into the hole on the base frame.
Store the treadmill in a clean and dry environment away from children.
CAUTION: Failure to secure the main frame with the Spring Knob may cause the treadmill accidental fall
and cause bodily injury.