8
OPERATING THE COMPUTER
Flip the Master Power Switch that is located at the front of the treadmill to
the ON position. Before beginning a workout session ensure that the Safety
Tether Key is properly placed onto the Computer Console and the Safety Clip
is securely attached to an article of your clothing.
NOTE: Always stand on the side rails when you start the treadmill, never start the treadmill while you
are standing on the running belt.
FUNCTION BUTTONS:
:
Press this button to turn your computer console on and off.
MODE:
Press the MODE button to select training TIME for target pre-setting in STOP mode before
training.Press the MODE button to select PROGRAM mode (P0- Manual Program, P1-P3 Pre-
Set Programs) in STOP mode before training.
Press and hold the MODE button for 3 seconds to reset the all data values to zero and the PROGRAM to
P0 (Manual Program).Press the MODE button to select each function of the computer during training.
SPEED∧ (SPEED UP):
Press the SPEED∧ button to select desired PROGRAM mode (P0-Manual Program, P1-P3 Pre-Set
Programs) in STOP mode before training. Press the SPEED∧ button to make upward adjustments
for pre-setting target training time in
PROGRAM mode before training.The speed range is from 1.0 KPH to 6.0 KPH.
SPEED∨ (SPEED DOWN):
Press the SPEED∨ button to select desired PROGRAM mode (P0-Manual
Program, P1-P3 Pre-Set Programs) in STOP mode before training. Press the SPEED∨ button to
make backward adjustments for pre-setting target training time in PROGRAM mode before
training.The speed range is from 1.0 KPH to 6.0 KPH.
DISPLAY FUNCTIONS:
Scan:
During your workout, press the MODE button until the Scan indicator LED lights up, the computer will
automatically scan each function in sequence with change every 5 seconds.
Speed:
During your workout, press the MODE button until the Speed indicator LED lights up, the computer will
display the current running speed .
Dist. (Distance):
During your workout, press the MODE button until the Dist. indicator LED lights up, the computer
will display the cumulative distance travelled.
To Next Page
Loading...