EasyManua.ls Logo

Boehringer 3930 - Specifications; Warranty and Repair

Default Icon
9 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Inlet and outlet fittings: 1/8 NPT, High Flow Bubble Barb (P/N 2469)
Gauge accuracy ANSI Class B, ± 5% FS 3 mmHg)
Regulation Accuracy: ±10% FS from full flow to zero flow with 14 FR catheter attached.
Leak rate in OFF position: less than 1 cc/min
Materials: polycarbonate, hard-anodized aluminum, stainless steel, Buna rubber, acetal copolymer.
Model
Regulation Range
User Selectable Modes
Wt. (lb)*
H x W x D (in)
3930 15 - 60 mmHg Off & Regulated Control 3.40 lbs 10
1
/
4
” x 7½” x 8
1
/
2
Operating and Storage Limits
We recommend that Boehringer Suction regulators be operated and stored at controlled conditions that typically
reflect the medical facility environment.
Boehringer Laboratories, Inc. guarantees your VAVD regulator for FIVE years from the date of manufacture.
Boehringer Laboratories, Inc. warrants to the original purchaser, new suction regulators purchased directly from
Boehringer Laboratories, Inc. or from an authorized dealer or representative. This warranty guarantees the
suction regulators to be free from functional defects in materials and workmanship. We also guarantee that our
suction regulators will meet our published specifications.
All regulators returned for repair shall be clean and free from contamination prior to shipment. This requirement
is for the safety of our employees as well as to comply with Federal Law prohibiting the shipment of unmarked
biohazard materials. If units are returned contaminated, a cleaning charge may result.
A service charge may be assessed on any unit returned that shows evidence of gross abuse.
Boehringer Laboratories, Inc. is the only authorized warranty service center for your VAVD regulator.
This warranty excludes acts of God, fire, flood and acts of war, terror or insurrection.
Boehringer Laboratories’ sole and exclusive remedy under this warranty is limited to repairing and/or replacing
the suction regulator. There are no other express or implied warranties beyond these warranties set forth above.
At Boehringer Laboratories, we are committed to lowering your suction regulator costs of operation!
A Return Material Authorization Number (RMA) must be obtained prior to returning a unit for service. Please
contact Customer Service at
SPECIFICATIONS
Warranty and Repair
Boehringer Laboratories, LLC
800-642-4945
info@boehringerlabs.com
300 Thoms Dr
Phoenixville, PA 19460
www.boehringerlabs.com
Covered under one or more of the following Boehringer patents (Additional Patents Pending):
6,264,890 6,228,056 5,992,239 5,879,624 5,409,491 5,372,593
5,354,262 5,203,778
2011 Boehringer Laboratories, Inc.© Boehringer is a trademark of Boehringer Laboratories, Inc.
3930.003 Rev C P/N 34031 9 of 9
Released July 2014 User Manual VAVD Controller