BOFU BRB23 User Manual

PREMIER DECORATIVE ROLLER SHADES
HORIZONTAL FLAT SHEER SHADING
1. Position the blind:
Inside the recess: Decide the position of the blind so that it will be clear of any latches or fixtures.
Outside recess: Decide the position so that the overlaps on the both side of the recess are equal.
2. Fixing the brackets:
The brackets are designed for face or top fixing to
frame, wall or ceiling.
a. Having decided the positioning of the blind, preset it to
the desired position making sure it is centred and level.
b. Mark the location of each bracket with a pencil, make sure
they are on the same line.
c. Place each bracket on its location markings and mark
through the desired screw hole positions.
d. Use the screws provided to fix the brackets to wall.
3. Installing the blind.
Hold the cassette parallel with brackets, make sure the back
panel of cassette sits on the back hooks of the brackets
where it was attached to the wall. Push it forward until the
locking mechanism clicks.
Attention: After the locking mechanism clicks, if you see the
front hooks of the brackets stay firm into the top edge of
cassette, that is correct.
Warning
Please don't let the front hooks of cassette to lock into
the front top edge of the cassette first, as this will make
it impossible to install.
4. Operating the blind.
The beaded chain side control at the right-hand side or left-
hand side of blind is used to raise or lower the blind to the
desired height.

BOFU BRB23 Specifications

General

Brand	BOFU
Model	BRB23
Category	Engine
Language	English

Summary

Roller Shades Installation Guide

Blind Positioning

Decide blind position inside or outside the recess for optimal clearance and equal overlap.

Bracket Fixing and Mounting

Fix brackets for face or top fixing, ensuring they are level and aligned on the wall.

Blind Installation Procedure

Attach cassette to brackets, ensuring it clicks securely without front hooks locking prematurely.

Blind Operation

Use the beaded chain control to raise or lower the blind to the desired height.

Chain Tensioner Installation and Safety

Chain Tensioner Mounting

Install tensioner on a flat surface for a taut, untwisted chain, suitable for various mount types.

Tensioner Safety Function

Ensure chain loops are kept away from children by correctly installing the safety tensioner.

Motor and Transmitter Operation

Technical Specifications

Details on motor torque, speed, and battery specifications for the rechargeable motor.

Initial Transmitter Programming

Connect the battery pack and program the first transmitter with the motor unit.

Motor Rotation Direction

Instructions on how to change or reverse the motor's rotation direction.

Setting Motor Limits

Procedure to set the bottom limit for the motor's travel range.

Advanced Motor Settings and Maintenance

Setting Upper Travel Limit

Configure the motor's upper travel limit by jogging and confirming the position.

Setting Intermediate Position

Define and save a specific intermediate position for the motor.

Transmitter Management

Program additional transmitters and delete unwanted ones.

Motor Charging and Troubleshooting

Information on charging the battery and troubleshooting common motor issues.