TWS Pairing
1. Make sure both speakers are powered on and they are disconnect with other devices;
2. Press the " " button twice quickly on one of the speakers to enter TWS pairing mode;
3. After two speakers are paired, you will hear a prompt tone. At this time, the indicator light of first speaker is
blinking, the other one is solid;
4. Enable the Bluetooth feature of your cell phone or other devices, find and connect the speaker which named of
"BOGASING-G4";
5. After the two speakers are successfully paired, it will automatically enter the TWS mode when the next time you
turning ON, no need to re-pair;
6. If the speaker was ever paired with other speakers, Please press and hold the " " button to reset it. Restart
the speaker after reset, and then refer to steps 1-4 to enter the TWS pairing.
7. In TWS mode, only the main speaker can be use for hands-free calling when there is a call, the other speaker has
no sound.
08
EN
To Next Page
Loading...
