Bogen HFCS1LP User Manual

© 2006 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2091-01E 1302
High-Fidelity
Ceiling Speakers
Models
HFCS1 & HFCS1LP
(
Off-white
)
,
HFCS1B & HFCS1LPB
(
Black
)
Installation and Use Manual
54-2091-01E_54-2091-01B.qxd 3/6/13 4:21 PM Page 1

Bogen HFCS1LP Specifications

General

Brand	Bogen
Model	HFCS1LP
Category	Speakers
Language	English

Summary

Product Description

Important Safety Instructions

Essential safety precautions to follow before installing and using the unit.

Product Diagrams

Front Drawing (grille removed)

Illustrates the front view of the speaker with the grille removed, showing key components.

Rear Drawing

Depicts the rear view of the speaker, highlighting the back can and input connector.

Rear Drawing (terminal cover)

Shows the rear of the speaker with the terminal cover, detailing connections and knockouts.

Installation

Speaker Wiring

Daisy-Chaining

Explains how to connect multiple speakers in a series using the snap-lock input connectors.

Speaker Polarity

Details the importance of maintaining correct polarity for optimal sound performance.

Terminal Covers

Describes the terminal cover halves, wire exit, eyelets, and conduit knockout usage.

Selecting Power Levels

70V/100V Systems

Instructions for setting the speaker's power level for 70V and 100V high-impedance systems.

16-ohm Systems

Guidance on selecting the 16-ohm impedance for low-impedance amplifier applications.

Speaker Grille Installation & Removal

Installation

Procedure for securely fitting the speaker grille onto the speaker bezel.

Removal

Method for carefully removing the speaker grille using a pocketknife blade.

Specifications

Accessories

TBCR (Tile Bridge Support Ring)

Description of the TBCR accessory for securing and distributing speaker weight.

CK10 (Cable Kit, 10')

Information about the CK10 cable kit used as a safety cable.

Limited Warranty; Exclusion of Certain Damages