Bogner Ecstasy 101B - User Manual

BOGNER AMPLIFICATION
1
Ecstasy User Manual
Please read safety instructions before operating this amplifier!
Thank you for purchasing the Ecstasy 101B. As modern guitar amplifiers go, the Ecstasy is not the least
expensive, so we assume that you've listened very carefully to other amplifiers available on the market
and we agree with you! The Ecstasy combines the sonic characteristics of the best modern and vintage
amps, while offering you the technological advances you've come to expect from Bogner. This manual
was designed to help you get the most from your new Bogner. We have included some tips & uses you
might not have thought of, so please take a few minutes to read it. Of course, please feel free to call your
Bogner dealer anytime you have questions. The Ecstasy was designed with simplicity & usability in mind.
It was built with the finest materials the world has to offer so with just a tube change and a biasing every
once in a while, the Bogner Ecstasy should provide you with the most wonderful sound for many, many
years to come.
Features:
• 3 channel all tube design
• Ch1: gain, bass, middle, treble and volume control
• Ch1: 3 position pre eq and gain boost
• Ch2: gain, volume and 3 position pre eq
• Ch3: gain, volume and 3 position pre eq
• Ch2 & 3: common bass, middle and treble controls
• Ch2 & 3: common gain-structure, gain boost and plexi mode switch
• Tube buffered effects loop, series or parallel (mix control) mode, master volume
• Dual assignable presence controls with excursion switches for loose and tight feel
• Half power & old/new style switch (cuts power from full to about 25 watts)
• Functions on foot controller: ch1, ch2, ch3, boost 1, boost 2, fx loop, stand-by mute
Options:
• 120W EL34, 100W 6L6 or 45W 6V6 power amp
• Class A/AB mode switch, cuts power further
• Individual line-out controls for each channel (standard one common control)
• Metal Grill (not available on 20thA)
• Classic Circuit (discontinued)
• 20thA Circuit (6L6 standard), gold plexi front panel and larger head shell
DIMENSIONS and WEIGHTS: Are subject to change anytime, Please measure your amp carefully if a Custom
Case is being made. Add ¾ inch for each, handle and rubber feet.
Head: 9.50” H 27.25” W 10.25” D 46 pounds
20thA Head: 10.25” H 29.75” W 10.50” D 51 pounds

Summary

Ecstasy Amplifier Overview and Specifications

Product Features and Options

Lists key features, available options, and technical specifications of the Ecstasy amplifier.

Dimensions and Weights

Provides physical size and weight details for the amplifier head, including caveats for custom cases.

Channel Operation and Tone Shaping

Initial Setup and Channel 1

Guide to connecting, powering on, and operating the clean Channel 1 with its controls and pre EQ.

Channels 2 and 3 Operation

Details for operating Channels 2 and 3, including shared controls, pre EQ, and gain boost functions.

Advanced Channel Controls

Explanation of 'Gain Boost', 'Structure', and 'Plexi' switches affecting channels 2 and 3.

Effects Loop and Power Amp Functions

Effects Loop and Master Volume

Instructions for connecting and using the series/parallel effects loop and master volume control.

Power Amp Operation Modes

Details on Class A/AB, Half/Full Power, and Old/New (Triode/Pentode) modes for power amp tuning.

Line Out and Slaving

Guide to using the line out for slaving, recording, or connecting to other audio equipment.

Advanced Controls and Special Options

Excursion and Presence Controls

Explanation of Excursion and Presence switches for speaker damping and fine-tuning tone.

Classic Option

Details on the discontinued Classic option, its circuit differences, and control variations.

20 th Anniversary Option

Information on the 20th Anniversary option, its preamp circuit, and expanded sound capabilities.

Bogner Ecstasy 101B Specifications

General

Type	Tube Amplifier
Power Output	100 Watts
Channels	3
Tubes	4 x EL34, 5 x 12AX7
Controls	Bass, Middle, Treble, Presence, Master Volume
Footswitch	Yes
FX Loop	Yes
EQ	3-Band
Speaker Outputs	4, 8, and 16 ohms