Do you have a question about the Bogner GOLDFINGER 45 and is the answer not in the manual?
Identifies and describes the function of each knob and switch on the front panel.
Details the connectors and switches located on the rear panel of the amplifier.
Lists the primary features and capabilities of the Goldfinger amplifier.
Outlines available options for the amplifier, such as head or combo versions.
Provides physical specifications and weight for different Goldfinger models.
Explains how to power on, use standby, and select output power modes.
Describes the Presence control for shaping high-frequency power amp response.
Details the controls for the clean 'Alpha' channel, including EQ and bright switches.
Details the controls for the gain 'Omega' channel, including EQ and mode switch.
Explains the function of the Deep Mode switch for altered voicing and attack.
Covers using the boost function and the tube-buffered pre-FX loop.
Describes the post-FX loop for effects units or as a volume boost.
Explains the reverb amount control and its foot controller integration.
Highlights differences in the 90W model's power amp section and tubes.
Details proper impedance matching when connecting speaker cabinets.
Explains how to connect and utilize the amplifier's foot controller.
Guides on how to check and replace the amplifier's fuses.
Loading...