Picture 7
5.6 Now take the handlebar and rotate it upwards (picture 8) to the desired height, then
tighten the screws. Your Bastard PRO have now assembled your Bastard PRO and you’re
ready to ride. (Picture 9).
Picture 8 Picture 9
Chapter 6 User Guideline
6.1 safety driving precautions
6.1.1 When riding the Bastard PRO always use protective gear, like a SPSC or CE certified
helmet, protective clothing (with long sleeves and long trousers) and appropriate footwear
(sneakers and make sure the laces cannot get caught in the wheels, motor or other moving
components). Never ride the Bastard PRO barefoot in sandals or flip-flops.
6.1.2 Always obey traffic rules, don’t ride on unsafe roads.
6.1.3 For your and other people’s safety, always ride at moderate speed (12.4 miles/h).
6.1.4 Familiarize yourself with the Bastard PRO, all its features like, accelerating, braking,
balancing and full utilization of the electric scooter. We recommend you to try this on an
even surface in a quiet surrounding.
6.1.5 Never try performing dangerous or risky actions, like one hand riding, freestyling, etc.
don’t drive when you are intoxicated, by alcohol, drugs or medication.
6.1.6 Don’t turn off the power abruptly, while the Bastard PRO is running.
6.1.7 Don’t drive on slippery or wet roads, this could damage your Bastard PRO or cause
personal injury. It will also affect the braking distance, so always keep a safe distance when
driving under these conditions.
To Next Page
Loading...
