Power display
On the display the battery icon indicates the remaining power capacity of the
battery.
Distance
The distance of the current trip is indicated on the display.
Braking system
The hand brake lever on the left side
of the grip activates the brake.
Squeezing the hand brake lever will
activate the servo-brake situated in
the rear wheel. Make sure to release
the throttle before using the brake.
Front/Rear light & Horn
Switch
1. If you would like to switch on the
front&rear light, push the switch up to
the “ON” position.
If you want to switch off the lights,
push down the switch to the “OFF”
position
2. You can sound the horn by pressing
the yellow horn button
Get ready to ride
If you are using the e-scooter for the first time, choose a flat, dry surface
in a quiet environment.
Before operating your e-scooter check with your local authorities about
specific regulations regarding riding an e-scooter on public roads.
Do not ride your e-scooter in bad weather, in heavy rain, strong winds,
snow and ice (below -5°C). Do not ride through puddles.
Follow the instructions mentioned in the user’s manual to fold and open
the e-scooter.
To tighten or loosen the brake lever, use the hex key in the included
toolbag.
Zero start function
To Next Page
Loading...
