Turn on the e-scooter by pressing the Power button.
Your e-scooter is equipped with a zero start e-motor system and brake
switch-off device. When you want to ride, put one foot on the deck while
pushing off with the other foot. Now gently push the throttle. The e-
scooter will now move.
When you use the brake, the power will automatically be cut off, for
safety reasons.
Before using the e-scooter we strongly recommend you to read this manual
thoroughly.
1. When riding the e-scooter always use protective gear, like a SPSC or CE
certified helmet, protective clothing (with long sleeves and long trousers)
and appropriate footwear (sneakers and make sure the laces cannot get
caught in the wheels, motor or other moving components). Never ride
the e-scooter barefoot in sandals or flip-flops.
2. Never try performing dangerous or risky actions, like one hand riding,
freestyling, etc.
3. Never ride the e-scooter down the stairs, this may lead to damage to
your e-scooter or personal injury.
4. The maximum speed of the e-scooter is 23km/h. However, for your own
safety we strongly advise you not to exceed 20km/h.
5. We strongly recommend you to not ride when it is dark at night. If you
need to ride by night, turn on the front and rear light and limit your
speed to 15km/h
6. When the battery is running low and has reached the bottom of the icon
on the display, the controller system will automatically shut down to
protect the lifespan of the battery. You can now ride your e-scooter by
pushing your foot.
7. This e-scooter is designed to be used by one person. Never try to ride
this e-scooter with two or more persons at the same time.
8. Keep this device away from heat sources, direct sunlight, humidity, water
and any other liquids.
9. Do not operate the device if it has been exposed to water, moisture or any
other liquids to prevent against electric shock, explosion and/or injury to
yourself and damage to the device.
10.Do not use the device if it has been dropped or damaged in any way.
11.Repairs to electrical equipment should only be performed by the
manufacturer. Improper repair voids the warranty and may place the
user at serious risk.
12.Do not puncture or harm the exterior surface of the product in any way.
To Next Page
Loading...
