Bohmer-AG 8000W-E - Before Starting

W Series
© Böhmer-AG © Böhmer-AG
9
English
Attach the rubber feet to the
bracket using the nuts and bolts
provided.
Locate the holes on the frame
either side of the recoil starter.
Position the handle. Secure
using the long bolts.
The Battery is connected
black to ‘-’ negative, red to ‘+’
positive. Secure with nut and
bolt then shield with terminal
covers.
Before Starting
Add fuel:
1. Open the ller cap
2. Fill with unleaded petrol up to the lter
3. Replace ller cap
Add oil:
Note: The generator will automatically shut down if
insufcient oil is detected.
1. Place generator on a level surface
2. Open the oil ller bung
3. Fill with 10W-40 semi-synthetic oil up to the threads
4. Replace oil ller bung
Oil ller bung
Fuel gauge / ller cap