Loading the camera
2
1
Now that you are familiar with the various features of
your camera and know how they are operated, you are
ready to start loading.
To avoid exposing the edges of the film to light, the
camera should be loaded in a dimly lit place, well away
from sunshine.
Before loading the camera:
1. Set the side release (1) to STOP.
2. Set the disengaging lever (2) to MOT.
3. Move the selection knob (3) until the number corres-
ponding to the desired filming speed faces the red
dot.
4. Wind the camera (page 16).
To Next Page
Loading...
