16 mm films
. The H 16 Reflex camera takes 100 or 50 ft. spools of
single or double perforated 16 mm film. Films with a
single row of perforations are used when a magnetic
track is to be added to the original film.
At each extremity of the film there is a leader-approx-
imately 6 ft. at the beginning and 3 ft. at the end-to
prevent the sensitive film being exposed to light dur-
ing loading or unloading. These leaders are usually
removed by the processing laboratories.
Film running times at the following filming speeds
Black-and-white and colour films come in various
sensitivities, which are expressed in ASA or DIN
degrees and indicated on the instructions leaflet
accompanying each film. The date before which the
film should be exposed is normally stamped on the
film pack. 16 mm film is available in the unprocessed
condition with a magnetic stripe for sound recording.
We would advise you against using this film: the mag-
netic layer can cause premature wear on the parts
which come into contact with it, particularly the pres-
sure pad, and metal particles may find their way into
the camera mechanism.
f.p.s.
12 18 24 32 48 64
~
1 rn (," 3 ft)
10.9 sec.
7.3 sec.
5.5 sec.
4.1 sec. 2.7 sec. 2 sec.
15m(,,-,
50 ft)
2 min. 44 sec.
1 min. 49 sec. 1 min. 22 sec.
1 min. 1 sec.
41 sec.
30 sec.
I
30 m (,-,100ft)
5 min. 28 sec. 3 min. 38 sec. 2 min. 44 sec.
2 min. 3 sec. 1 min. 22 sec.
1 min. 1 sec.
7
To Next Page
Loading...
