Orion ISS
www.bolid.com 26
GETTING STARTED
After mounting and wiring the S2000-K, turn its power on. The keypad LCD shall backlight, the key-
pad sounder shall respond with a beep. The S2000-K being communicated with the network controller
over the RS-485 interface, the keypad LCD shall display the current time. Otherwise, the keypad LCD
shall display NO RS485 LINE, the keypad LED flashing once per a second.
In order the S2000-K to operate as a part of an Orion system it must be assigned to a unique network
address (see Section Programming the Network Address of the S2000-К of this Manual).
To Next Page
