Portable C
RIVSET
®
(10 - 50 kN) | WELTAC
®
(10 - 50 kN)
HE.18644_A © 08/2019
Abb. ähnlich / pic. similar
US
The compact ergonomically formed design consists
of 2 components. The grip area is rubber coated
and therefore slip resistent. The housing design is
optimized in respect of the center of gravity which
improves the handling and supports fatique-proof
working.Li-Ion batteries do neither have a memory
eff ect nor self discharge. Even after long periods of
non operation the tool is always ready to operate. In
addition we see a lower power weight ratio with 50%
more capacity and shorter charging cycles compared
to NiMH batteries.
3.3 Description of the tool indication
See Tab. 2.
Prior to operating the unit the charging level of the battery
should have been tested. A low charging level can be de-
tected by the fl ashing of the LED for 20 s at the end of a
riveting cycle.
4. Remarks in respect of the
determined use
4.1 Operation of the unit
Cycle: see pictures in front
First the proper tool kit must be selected for the required
application.
WARNING
Do not operate the tool without workpiece/sheet
metal. This might destroy die and/or punch.
WARNING
The riveting process can be interrupted at any
moment by releasing the Trigger in case of emer-
gency.
WARNING
Do always adjust the joining force according to
your current application.
Ignoring that warning might destroy the tool kit and
might fracture and hurt nearby personell.
WARNING
Use eye protection when operating
the tool.
2K
WARNING
After having terminated the wor-
king cycle and prior to changing
the head/tool kit remove battery
to avoid unintended use. Avoid
unintended starts. Make sure the
trigger is in the off position before
inserting the battery.
CAUTION
Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing and gloves away from
moving parts.
CAUTION
Keep work area clean and organised. Cluttered and
dark areas might trigger accidents.
WARNING
Keep proper footing and balance at all times.
WARNING
Use safety gear where appropiate.
4
translation of the
original instruction manual
To Next Page
Loading...
