Bolt Power N02 - Charging; Charging Times; Charging Your USB Devices; LED Flashlight

-6-
USB Charging Rating
15V/1A
3.5hr
Estimated
Time
5V/2A
6hr
Charging the N02
Connect the N02 using the included USB charge cable to the USB in port and the
USB car charger. It can be recharged from any USB powered port like an AC
adapter, Car charger. laptop and more. The USB In port is rated at 5V/2.1 Amps
and 15V/V1 amps to ensure safe and ensure safe and efficient charging of the
internal lithium battery due to FCC regulations, we recommend not to charge and
discharge the unit at the same time.
N02 charging times
The time to recharge the N02 will differ based on the discharge level
and the power source used. Actual results may vary due to battery
conditions.
Charging your USB Devices
You can charge virtually any USB devices. Connect the included USB charge
cable to the USB Out port and connect to your USB device. Any 5V USB (White)
devices, Quick Charge 3.0 USB (Blue) 3.6V
˜
12V devices.
LED Flashlight
The N02 has an integrated ultra-bright LED flashlight. It has three (3)
light modes: Flashlight, SOS, Strobe
The N02 has a built in energy saving feature that will automatically turn the
unit off after one (1) minute. To continue using simply power on the unit
again.
Technical Specifications
Internal Battery: Lithium Polymer
Peak Current Rating 1200A
Operating Temperature
-20
º
C to +50
º
C
-4.0 F to + 122 F
-20
º
C to +50
º
C
-4.0 F to + 122 F (Avg. Temp)
Capacity: 44.4Wh
Input 5V/2A 15V/1A
USB 1 (output) 5V, 2.1A
USB 2 (output) QC 3.0
DC (output) 12V/8A
Dimensions { L x W x H} 7.1x3.2x1.4 Inches
Weight
Cold Craking Amps
2.4 Pounds
600A
Storage Temperature
-7-