Basic Operation.
GET GOING - QUICKLY!
GET GOING - QUICKLY!
Alright, now we’re ready to take the Bolzzen
Commando out for its first ride!
We’ve unpacked, unfolded, fully charged, and
have our safety gear! What’s next?
Short press the Power Button.
Your display will light up and
you’re ready to go!
Power On.
This is exactly what you think it
is. When you’re ready, use your
right thumb to slowly push
down on the lever. The Sine
Wave Controller used in the
Commando will deliver you
smooth power.
Thumb Throttle.
P8 is the setting that controls if you can take-
off under the Commando’s power, of if you
need to start with a little kick first.
Enter your P-Settings an verify if P8 is set to
ON or OFF.
Zero Take-Off
To Next Page
Loading...
