Basic Operation.
GET GOING - QUICKLY!
GET GOING
- QUICKLY!
Alright, now we’re ready to take the Bolzzen
Gladiator out for its first ride!
We’ve unpacked, unfolded, fully charged, and
have our safety gear! What’s next?
Press and hold the Power
Button for 3-seconds. The
screen will turn on. Note, if the
Bolzzen Gladiator doesn’t move
within 90-seconds, it’ll
automatically turn itself off.
Power On.
This is exactly what you think it
is. When you’re ready, use this
lever as the accelerator; pull
back softly and a lot of fun
happens!
Speed Controller.
To change the amount of power the Bolzzen
Gladiator has on take-off, you’ll need to:
• Press the Power and Mode button
simultaneously. This will enter the P
Settings menu, but please be very careful
not to make unnecessary changes as it
can cause issues. Press the Power button
multiple times until you reach P12
• Now set the take-off power from 1(min) to
5(max), using the Mode button
Take-Off Power/Torque
Setting.
To Next Page
Loading...
