It’s very important to make sure before your first ride, your Bolzzen Gladiator has had a full charge.
There is some juice in the battery from the factory, but not enough.
So, get your charger from the box, plug it into the wall, turn it on and then carefully plug the
charger into either of the deck mounted ports. Ensure that you screw in the the charger to get a
solid, safe connection.
The light on the charger should be red while charging and turn green once fully charged.
Getting Started.
GETTING STARTED.
Setting Up For Your First Charge.
Warning:
Make sure that the temperature isn’t in the
extremes (below 5°C or above 40°C)
otherwise certain safeguards within the
charger and battery will trigger and the
charging process will stop.
Pro Tip:
There are two charge ports on the deck to
enable two chargers, for double time
charging!
To Next Page
Loading...
