Bomag BT 60 - User Manual

Operating instructions
Maintenance instructions
BT 50 / BT 60 / BT 65 / BT 70
S/N 101 540 30 0101 › S/N 101 540 31 0101 ›
S/N 101 540 33 0101 › S/N 101 540 40 0101 ›
S/N 101 540 43 0101 ›
Catalogue number
008 135 41 12/1998
Vibratory tamper
www.discount-equipment.com
Go to Discount-Equipment.com to order your parts

Summary

Safety regulations

Operation

Filling in fuel

Instructions for safely refueling the machine with the correct fuel and mixing ratio.

Starting the engine

Step-by-step guide for safely starting the engine, including choke and throttle lever settings.

Work;operation

Shutting the engine down

Proper procedure for stopping the engine, including idling before shutdown.

Maintenance

Fuels and lubricants

Specifications for fuel quality, mixing ratios, and oil types required for the machine.

Maintenance chart

Checking the oil level in the tamper foot

Method for checking the oil level in the tamper foot and topping up if necessary.

Cleaning the spark-plug, check, replace if necessary

Cleaning the air filter (more frequently under dusty conditions)

Cleaning the fuel filter inside the tank

Changing the oil in the tamper foot

Changing the air filter

Trouble shooting

Engine

Diagnosing and resolving common engine problems such as failure to start or crank.

Bomag BT 60 Specifications

General

Engine Manufacturer	Honda
Engine Model	GX 100
Operating weight CECE	60 kg
Height	965 mm
Fuel	Petrol
Ramming frequency	700 blows/min
Centrifugal Force	16 kN
Tamping Foot Width	280 mm
Working width	280 mm
Ramming Shoe Size	280 mm
Stroke Height	65 mm
Travel Speed	20 m/min
Stroke at rammer foot	65 mm